Orbital Super Berus 4-in-1 Chain
Overview
While looking through M.A.I.L. for new weaves to try, I found Orbital Super Berus 4-in-1 Chain by mithrilweaver. This weave is a member of the European family. If you want to make this yourself, I recommend this tutorial by Aussie Maille.
Materials
For the sample piece showcased in this post, I used two sizes of rings made by hand from 16 SWG Bright Aluminum wire purchased from The Ring Lord. The smaller rings have an ID of 5mm for an AR of 3.1. The larger rings have an ID of 10mm for an AR of 6.15.
Notes
The Orbital Super Berus 4-in-1 Chain is not hard to understand. However, it can be tricky to make, especially if the rings are too tight. In my sample, the tightness made it impossible for the weave to lie flat; though with looser rings, it would look great. As a chain weave with a flat and wide cross-section, it works well for bracelets, chokers, and straps. I also find that this weave is sensitive to changes in AR, so I recommend testing different ring combinations before committing to a larger piece. While it can be challenging to construct, its aesthetic potential makes it worth learning for those with some experience and the patience to experiment.
Pictures
Flat
Flat: Angled
Flat: Profile
Vertical
Vertical: Profile
In Process
